Grande Vitesse Systems nomadic 1U 12xPro SSS



nomadic 1U 12xPro secure storage technical specifications


Total storage in 1U rack space:
3RAID combines Fibre, SAS, and iSCSI storage technologies with Fibre Channel Speed and data protection with iSCSI controller access to the same data over TC/IP network in a
1U rack-optimized enclosure.
The innovative GVS-designed Nomadic 1U RAID architecture combines affordable, high-capacity SAS c drive technology with a single to dual controller host channel interface for redundancy, fast,
reliable data access. Each GVS Drive Module uses
a dedicated 6.0Gb/s drive channel, maximizing
the 800MB/s Fibre Channel host connection.

4480C Controller RAID features:
RAID level 0, 1, 1E, 3, 5, 6, 10, 50, 61, 65, Single Disk or JBOD
Multiple RAID selection
12(8) independent logical arrays configurations per controller
Online array roaming
Offline RAID set
Online RAID level/stripe size migration
Online volume set growth
Support global hot spare and dedicated hot spare
Instant availability and background initialization
Automatic drive insertion/removal detection and rebuilding
Greater than 20TB per volume set (64-bit LBA support)
Greater than 20TB per disk drive
Each logical array can have an independent RAID level
Write back and write through cache selection
Variable stripe size
LUN slicing
Online RAID group capacity expansion
Drive hot-swapping
Intelligent Drive Management
Battery backup support
Disk scrubbing/ array verify scheduling for automatic repair of all configured RAID sets
Login record in the event log with IP address and service (HTTP, telnet, and serial)
Support intelligent power management to save energy and extend service life
Support NTP protocol to synchronize RAID controller clock over the on-board LAN port
Redundant controller operation with active/active and failover/failback function
Dual-active RAID controller with cache mirroring through dedicated high-speed bus
Automatic synchronization of firmware version in the dual-active mode
Multi-path & load-balancing support (Microsoft MPIO)
Support for multiple RAID sets, multiple hosts, and LUN masking and mapping
Max 122 devices
Max 128 LUNs (volume set) per controller

Management:

GVS View management software for all major platforms via Ethernet port
Event notification via an independent GVSView client utility
Field-upgradeable firmware in flash ROM
Firmware-embedded manager via RS-232 port
Firmware-embedded Web Browser-based RAID manager - Access your RAID subsystem from any standard internet browser via LAN port
Firmware-embedded SMTP manager monitors all system events, and user can select either single or multiple user notifications to be sent via e-mails
Firmware-embedded SNMP agent allows remote to monitor events via LAN with no SNMP agent required
Access terminal menu by telnet via LAN port
API library for customers to write its own monitor utility
SAP management feature to easily manage multiple RAID units in the networke


Host Interface to the Fibre storage:
Two or fourFibre Channel ports (SFP), high-speed throughput per channel
Thunderbolt and Fibre Channel ports (SFP)(Opt)
Dual Gigabit host (Opt)
Guaranteed delivery (1,600MB/s full duplex) per channel max 6.4Gbit/sec
Support for point-to-point, loop, and fabric (switched) topologies
Ethernet for remote management
Support read/write per port or read-only true
2nd Fibre Channel port w/o need for SAN Software or switch
Short-Haul Transceiver (supports up to 500m with 50/125 m MMF)
Long-Haul Transceiver (supports up to 10km with 9/125 m SMF)

RAID Controller specifications:
high-speed cache per controller up to 8GBmax

Thunderbolt 10Gbit Interface (opt):
Provide Thunderbolt port connection to high speed RAID storage w/Thunderbolt interface and Optional Fibre interface to same volume.

iSCSI Ethernet Interface (opt):
Provide 2-4 iSCSI Ethernet ports connect to LAN to high-speed RAID storage w/iSCSI client tools.

Battery Backup Module:
Smart battery backup module, integrated lithium cells. One fully charged battery module is used for each cached data protection during power failure.

Material:
Heavy-duty cold-rolled steel

Inside:
Zinc-plated with bright chromate

Outside:
Top cover anodized for better cooling

Cooling:
Rear: 4 x 60x 38mm fans
Self-regulating speeds and front-to-back cooling
Optional: Front security door locking, noise reduction, and air filter

Expansion:
12 hot-swap SAS 6Gb/sec drive bay with up to
8 x LC FC Interface, or iSCSI and 4xSAS expansion 128 drive support per single SAS expansion port

Controls:
Power secure lock key for on/off and system
reset + serial port + RJ45 + 4 FC LC or iSCSI + SATA and SAS with SAS expansion port

Indicators:
LCD Out-of-Band, RS-232, LAN, and Fibre Channel
Operating System:
OS Independent


Drive Bay:

Hotswap 12x SAS
Optional SAS or SATA Drive can be mixed

Drive Option:
N1S07252- Nomadic 1U SAS 4.0ms 16MB cache
N1S07082- Nomadic 1U SAS 16GB cache
N1S15072- Nomadic 1U SAS 32GB cache
N250SSD-Nomadic 1U SSD 2.4ms

Temperature:
5°C to 45°C (41°F to 113°F)
Storage temperature: -40° to 47°C (-40°F to
116°F)

Humidity:
Operation mode : 5% to 75%
Non-operation mode: 5% to 95% non-condensing

Altitude:
Sea level to 10,000 ft.
Maximum thermal output: 1465 BTUs per hour

Power Supply:
275W 2x275W hot-swap Redundant load-sharing hot-swap power supplies
Min 1x500W module w/ 12 Drive and Dual Controller support
Each 275W Module run Max 40A
Max 4x Universal input (100V to 240V AC),
power factor corrected
Frequency: 47Hz to 63Hz, single phase 8-4A

Power Consumption:
Min: 57W Max: 115W tolerance : ±5%

Dimension:
D22” (558.80mm) X W17.125” (434.98) X H1.75” (44.45mm)
With Front Locking Face Option D23.25” (590.55mm) X W17.125” (180.98) X H1.75” (44.45mm)

Weight:
17 (7.71 kg) with dual redundant power supply. With packaging 27lb (12.25 kg)

For hard drive capacity measurements, 1GB = 1 billion bytes; actual formatted capacity is less by 5% based on OS. Maximum capacity of 12TB achieved through use of 12x100TB Nomadic 1U Drive Modules. 3.4GB/sec per controller Actual rates will vary based on host interface. Weight varies by configuration and manufacturing process. GVS custom configures each Nomadic 1U based on customer specification from block size. Each drive goes through an extensive burn-in period prior to shipment.
Product specifications are subject to change without notice. The above specifications may change without notice.
Nomadic 1U 12xPro® designed and manufactured in the U.S. by Grande Vitesse Inc.


Grande Vitesse Systems